We use own and third party cookies. Continue browsing implies acceptance.More informationAccept

Deflex Injection System

<br />
<b>Warning</b>:  constant(): Couldn't find constant IMG_METAS_BANNER_INTRO in <b>/home/deflex5/public_html/Twig/Extension/Core.php</b> on line <b>1272</b><br />

Effectiveness and practicality

  • Maximum time saving
  • Totally automatic
  • Powerful
  • Easy to install, easy to operate

CHARACTERISTICS OF DEFLEX INJECTION DEVICE

  • Pneumatic with integrated oven
    Unlike manual injectors, the strength and speed of the injection will always be the same, and not will depend on the operator who tampers with the equipment. This ensures a quality of consistency injected into each injected prosthesis. 
    The oven is integrated with the pneumatic cylinder, which is not necessary to move the cartridge that is in place, saving time and avoiding possible problems of injection, which may arise from the transfer of the cartridge.
  • Fully automatic 
    Place the flask and cartridge, select the desired program, and activate the automatic cycle. Once the cycle is completed, the flask will already be injected, and available for a new injection.
  • 7 pre-configured and 7 free programs*
    Select the program corresponding to the material that will be injected, or set custom programs. 
  • Compact, easy to install, ease to use
  • MAD1300 injector hardly occupies an area of 15cm x 30cm. It only requires an air compressor, and access to an electrical outlet. The manipulation of the device is extremely intuitive.
    The flask adjustment system runs with a single movement and a single folding handle, saving operational time.
  • Powerful
    The pneumatic cylinder was developed with one wider diameter than the conventional, and drives a compressive strength of 862 Kg 6.5 Kg/cm2 = 1900 lb to 92.5 PSI, making it the most powerful in the market. This is not a minor technical detail, because the greater compaction force better quality of the injection, giving as a result molecularly more compact materials, which facilitates the work of retouching and subsequent brightness obtaining.
  • Pre-heating of the flask during the injection cycle 
    It doesn’t require that the flask is pre-heated in a separate oven. The flask is positioned on top of the oven at the beginning of the heating cycle, and is taking the appropriate temperature to avoid thermal shock with the injected material.
  • 6 th Generation of Deflex injectors
    MAD1300 is the 6th generation of injectors manufacturer by Deflex in its 17-year history. It is the product of a continuous evolution, and an accumulation of experience in the specialized area of injected prostheses.
MAD1300 injector MAD1300 Panel
DEFLEX INJECTOR MAD1300MAD1300 model
Injection mode Automatic
Injection cylinder Pneumatic
Temperature Digital - Programmable
Air pressure Programmable
Oven Integrated oven
Programs Pre-configured 7 PRG
Free 7 PRG
 Maximum temperatura of use

Programable: 500ºC / 932ºF
Recomended:390ºC/734ºF 

Flaskcover YES
Injection block sensor YES
Adjusting handle 1
HxWxD 62cm x 15cm x 30cm
Weight 22Kg. / 48.5Lb.
Power supply 220v or 110v
Diameter 22mm or 25mm
CE Certification YES
Ask for availability of injector models, diameter and power supply by country.